Art.Nr.: 300054910Artikelbezeichnung: CC-02 Kugellager-SatzBall bearings are a great first step in tuning your chassis, giving smoother, more efficient power and longer running times in addition to reducing wear and tear on your machine. This handy set includes the right number to fully complete your CC-02 chassis.• 850 Ball Bearings x2• 1150 Ball Bearings x16• 1260 Ball Bearings x2• 1510 Ball Bearings x2• Compatible with CC-02 chassis models  

Art.Nr.: 300051638Artikelbezeichnung: TRF420 C-Teile Achsschenkel vo (1)These are the spare steering uprights for the TRF420 race car chassis. They feature the new 2-part front upright designs which utilize separate arm and bearing housing components. You can also use these new uprights on existing Tamiya touring car racing platforms.• TRF420 C Parts x1• Components are molded in carbon fiber-reinforced plastic for superior rigidity.• Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.  

Art.Nr.: 300051639Artikelbezeichnung: TRF420 D-Teile Querlenker (2)These are spare suspension arm parts for the TRF420 racing chassis kit.• TRF420 D Parts x2• Components are molded in carbon fiber-reinforced plastic for superior rigidity.• The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible.• Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction.• For use with 3mm diameter shafts (sold in Item 51637).• Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars.• Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.  

Art.Nr.: 300051640Artikelbezeichnung: TRF420 E-Teile Achsschenkel hi. (1)These are spare rear upright parts for the TRF420 racing car chassis.• TRF420 E Parts x1• Components are molded in carbon fiber-reinforced plastic for superior rigidity.• Bearing positions are precisely aligned for maximum efficiency.• For use with 3mm diameter shafts (sold in Item 51637).• Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).  

Art.Nr.: 300051641Artikelbezeichnung: TRF420 F-Teile C-Träger (1) 4Grad.These are spare hub carrier parts for the TRF420 racing car chassis. They are an improved and more durable design compared to the previous design found in the TRF417/418/419 era of cars.• TRF420 F Parts x1• Components are molded in carbon fiber-reinforced plastic for superior rigidity.• The design was revised specifically for the TRF420 chassis, with greater resistance to shocks and crashes.• Upper and lower flanged tubes are now identical.• For use with 3mm diameter shafts (sold in Item 51637).• Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).  

Art.Nr.: 300051642Artikelbezeichnung: TRF420/TA-07 37Z Riemenrad StarrachseThis is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain.• TRF420 Front Direct Pulley x1• 0.2mm & 0.3mm Shims x2 each• Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis.• Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component.• Compatible with TRF420 and TA07 chassis cars.  

Art.Nr.: 300051644Artikelbezeichnung: TRF420 B-Teile Kar.-/Stoßfäng.Halter (1)One too many crashes? Not a problem! Tamiya has this spare bumper designed as a replacement part for the TRF420 kit.• TRF420 B Parts x1• The bumper design has been altered so as not to impact upon the chassis’ roll characteristics.• New body mounts are 2mm offset; change their attachment position for different body mount location to fine-tune your car's center of balance.• Compatible with TRF420 chassis cars.  

T3-01/SW01 Type 370 Torque-Tuned Motor

Art.Nr.: 300051647Artikelbezeichnung: TRF420 Alu Mitnehmer f.Spool-Diff.(2)vo.These front direct cups, which were designed for the new TRF420 chassis, are now to join the Tamiya Spare Parts line-up. Use them to replace worn parts in a timely manner, to maintain peak drive efficiency.Item Contents/Information• TRF420 Aluminum Front Direct Cups x2• Swing Shaft Cap Parts x1• Lightweight and with a hard coating, these direct cups offer superb durability.• Compatible with TRF420 chassis cars or those using Item 51642 TRF420 Front Direct Pulley (37T).  

TRF420/419/TA-07 Dichtung Kegeldf. (4)

Art.Nr.: 300051649Artikelbezeichnung: TRF420/419/TA-07 Kegeldiff.-Set 37TThe new gear differential unit for the TRF420 chassis is now available in the Tamiya Spare Parts Series. This set includes all parts needed to construct the 37T differential, which is lighter and even more oil-tight than predecessors. Why not build up a number of units with different oil viscosities and keep them ready to change in and out as your car/circuit requires?Set Contents/Information• Contains all parts required to assemble the TRF420 gear differential unit.• Differential pulley and case are slimmer to save 1.5g compared to predecessors.• Compatible with TRF420, TRF419* and TA07* cars.• *Requires use of shims to adjust bearing position.  

CC-02 C-Teile Lenkhebel (1)

Art.Nr.: 300042352Artikelbezeichnung: TRF 12mm Alu Felgenmitn. (4) Schmal/klem?Narrow tread clamp type wheel hubs are a popular choice for touring car models.?Employ a narrower tread on the front for sharper steering response, on the rear for improved grip, or even across the whole car!?Aluminum parts have the iconic Tamiya blue anodized finish. ?Contains four hubs, plus five 1.6x4mm cap screws.Compatible ChassisTA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TRF419, TRF419X, TRF419XR, TRF420 & TT-02 Type-S Chassis*For use with 24mm width (medium-narrow) wheels. Items 53646 and 54573 may be required.  

Art.Nr.: 300054887Artikelbezeichnung: TRF420 Toe Control RearSus Set?The parts in this set allow toe to vary as your car's suspension works, providing greater traction in corners for even faster times! ?As the suspension moves when the car corners, the toe also changes.?Uprights, caster blocks and lower mounts are crafted in rigid aluminum, while upright arms are carbon fiber.  

Art.Nr.: 300054934Artikelbezeichnung: TRF420 Mitnehmer Spool-Diff. (2) Stahl?Crafted in durable steel, these front direct cups will stand up better to impacts, and also provide more weight toward the front of your car.?Each cup weighs 8 grams, double the kit-standard aluminum part. ?Swing shaft caps are also included.Compatible ChassisTA07 MS*1, TA07 PRO*1, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis  

Art.Nr.: 300054929Artikelbezeichnung: CC-02 Stahl Anlenkungs-Set einstellbar- Tuningteil für das TAMIYA CC-02 Chassis- 1x 104 mm Stahl Anlenkungsstange- 1x 53 mm Stahl Anlenkungsstange- Kugelköpfe inklusive- Mit diesem Set kann die Lenkung besser eingestellt werden und läuft präziser.  

Buggy Champ Kugel.-Diff.-Set II

CC-02 Stahlkugelhülsen 6mm (18) Längsl.

Art.Nr.: 300054949Artikelbezeichnung: TA-07 Alu Ackermann-Set einstellbarFine-tuning your Ackerman steering angles can make all the difference to your chassis handling, and that is exactly what you can do with this adjustable set for the TA07 chassis. The aluminum components allow two different Ackerman settings.• 8mm and 8.5mm Aluminum Pivot Mounts x1 each• Aluminum Steering Bridge x1• The aluminum pivot mounts and bridge in this set can be used to replace kit-standard parts.• Exchanging the pivot mount parts (which have different hole offsets) alters the chassis Ackerman-milder steering from the 8mm component, and sharper from the 8.5mm part.• Aluminum blue anodized finish.• Compatible with TA07, TRF419 and TRF420 chassis cars.  

Art.Nr.: 300042353Artikelbezeichnung: TRF Super Short Big Bore Dämpfer + (4)- enthält 4 Dämpfer für Tourenwagen-Modelle- 6.5mm kürzer als die TRF Standard Dämpfer (42102) und 1.2mm größerer Durchmesser- für High-Grip / technisch anspruchsvolle Strecken- schwarze Super Soft Federn- HL Zylinder, Titanium-coated Kolbenstangen und High- Performance Silikon O-Ringe (transparent)- Federteller mit Gewinde einstellbar- Aluminium Teile in Blau- komplett neue V-Teile (einzeln 54871) ermöglichen mehr Einstellmöglichkeiten  

Art.Nr.: 300054965Artikelbezeichnung: TT-02S Alu Lenkungsset Spurstangen lang- Aluminium Lenkbrücke (langes Lenkgstänge)- Aluminium Lenkarme- einstellbare Spurstangen mit Sechskant- 2x 38mm Gewindestangen, 1x 42mm Gewindestange- Kompatibel mit dem TAMIYA TT-02 Type-S Chassis  

Art.Nr.: 300054966Artikelbezeichnung: M08 Aluminium Chassisverbinder Set (4)- Aluminium Chassis Pfosten (4 Stück)- für das TAMIYA M-08 Chassis- ersetzen die Teile B8- blau eloxiert- für die Radstände M und L werden alle 4 Stück benötigt, bei S-Radstand nur 2 Stück  

Art.Nr.: 300054623Artikelbezeichnung: XV-02/TT02 Radachse (2) KugelkardanThis wheel axle and axle ring set offers smoother rotation for less power loss. It removes potential problems caused by loose parts that were used in the previous generation of axle shafts that used a set screw to hold the pin in place. These parts can be fitted to the swing shaft in your existing universal shaft set.Wheel Axle for use with axle ring x2Axle Ring x2Can be used on M-Chassis, TT-02, DT-03 and DF-03 chassis cars fitted with universal shafts - use in place of wheel axle in Items 53597, 53791 or 53792.Can be used as a direct replacement for Item 53497 or 53681.  

XV-02/TD2 Alu BigBore Dämpfer-Set (2) vo