Hobbywing Sensor Cable 140mm 30810000

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

The LRP X22 Modified brushless motor series is a new force in high-end motor line. Developed for hardest competition in 1:10 scale applications, its technology remains unique and is backed with tremendous racing success around the World. Its predecessor Vector X20 does not need special introduction by winning three IFMAR World championship titles and multiple European Championship,  ETS and National titles - both in On-road and Off-road racing. When it comes to performance in terms of power, reliability and exceptional driving control, these motors are the best choice. With highest efficiency and maximum power in mind they are now furthermore improved and designed to stand out and meet every demanding expectations. The new X22 ultra lightweight, precision machined 7075-T6 Aluminum housing has now maximized cut-outs with additional openings on the flat parts to increase cooling surface and improve airflow for lowest running temperatures also at maximum loads with increased consistency. Beautiful “dark shine black” highest quality anodizing with X22 engraving will make it a perfect match to the optics of any model chassis. Also new is precisely adjusted and optimized timing range from 14.5° to 34.5° for most precise timing setting possible in modified racing resulting in improved drivability and setting options. Another novelty is the 2017 specification, dual-axis balanced sintered rotor new shaft with longer mounting surface. Internals have been updated for the best possible efficiency and vibration free operation. Combined with smaller dual precision 4x10x4 ABEC-5 bearings for precise running and longevity. Updated multi-layer PCB specification for even lower resistance. LRP’s unique waterproof PreciSensor™ system assures precise operation combined with any speed controller with additional advantage if paired with LRP speed controller line.The X22 Motor Series is built to comply IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification. New Air Vent Design - Increased cooling surface and openings for maximum heat dissipation, air-flow and lightweight design New modified specific timing range - 14.5°-34.5° timing range for smoother power delivery Competition racing stack - Highest grade Typ: Brushless, sensored Voltage Input: 1S-2S LiPo Wicklung: Star (Multistrand Copper Winding) Motordurchmesser: 35.9mm Motorlänge: 50.8mm Gewicht: 159-164g Rotordurchmesser: 12.5mm

LRP's neuer 40x40x10mm Ultra-High-RPM-Lüfter mit Empfängerstecker ist in Sachen effizienter Kühlung die erste Wahl. Mit seinem starken und schnittigen Rahmen, einem super leistungsstarken bürstenlosen Motor und zwei Kugellagern für längere Lebensdauer ist dieser Lüfter perfekt, um deinen Motor bei extremen Temperaturen und höchsten Lasten so effizient wie möglich zu kühlen. Der Lüfter verfügt über speziell konstruierte, symmetrische Lüfterflügel (exklusiv mit LRP Logotype), die die Luft mit bis zu 15.000 Umdrehungen pro Minute schneiden, um einen maximalen Luftstrom zu gewährleisten. So kannst du sicher sein, dass die Temperaturen deines Motors so niedrig wie möglich bleiben. Mit dem mitgelieferten Verlängerungskabel kann er in jeden Empfänger eingesteckt werden; Er kann aber auch direkt an den 2S-Akku gelötet werden, um maximale Leistung zu erreichen. 

Der neue 30x30x10mm Ultra-High-RPM-Lüfter ist in Sachen effizienter Kühlung die erste Wahl. Mit seinem verstärkten Rahmen, einem leistungsstarken bürstenlosen Motor und zwei Kugellagern für längere Lebensdauer ist dieser Lüfter perfekt, um die Effizienz deines Fahrtenreglers zu erhöhen und dessen innere Komponenten bei extremen Temperaturen und höchsten Lasten zu schützen. Der Lüfter verfügt über speziell konstruierte, symmetrische Lüfterflügel (exklusiv mit LRP Logotype), die die Luft mit bis zu 24.000 Umdrehungen pro Minute schneiden, um heiße Luft effizienter als ein Standardlüfter abzuführen. So kannst du sicher sein, dass die Temperaturen deines Fahrtenreglers so niedrig wie möglich bleiben.  * Direktes Upgrade für den Standard LRP 30x30x7mm Lüfter (#82513) ** Befestigungsschrauben für diesen Lüfter liegen sowohl dem Flow X TC Spec (#500004) als auch dem Flow X Offroad (#500003) bei.

LRP's neuer 30x30x10mm Ultra-High-RPM-Lüfter mit Empfängerstecker ist in Sachen effizienter Kühlung die erste Wahl. Mit seinem verstärkten Rahmen, einem leistungsstarken bürstenlosen Motor und zwei Kugellagern für längere Lebensdauer ist dieser Lüfter perfekt, um Motor oder Fahrtenregler bei extremen Temperaturen und höchsten Lasten so effizient wie möglich zu kühlen. Der Lüfter verfügt über speziell konstruierte, symmetrische Lüfterflügel (exklusiv mit LRP Logotype), die die Luft mit bis zu 24.000 Umdrehungen pro Minute schneiden, um einen maximalen Luftstrom zu gewährleisten. So kannst du sicher sein, dass die Temperaturen deines Motors oder Fahrtenreglers so niedrig wie möglich bleiben. Der Lüfter kann entweder als kompakter Motorlüfter oder als universeller Fahrtenreglerlüfter verwendet werden. Mit dem mitgelieferten Verlängerungskabel kann er in jeden Empfänger eingesteckt werden; Er kann aber auch direkt an den 2S-Akku gelötet werden, um maximale Leistung zu erreichen.

Für die Hall-Sensorsignale gibt es keinen einheitlichen Standard. Da der Flow X für die Hall-Sensorsignale von LRP-Motoren optimiert wurde, kann es vorkommen, dass Motoren anderer Hersteller nicht problemlos mit dem Flow X funktionieren. Das liegt daran, dass diese Motoren die Hall-Sensorsignale auf einen Pegel anheben, für den der Flow X nicht optimiert wurde. Wird ein solcher Motor an den Flow X angeschlossen, kann es vorkommen, dass die Startsequenz unterbrochen und deswegen nicht vollständig abgeschlossen wird. Dabei können folgende Probleme auftreten:- Flow X reagiert nicht auf den Sender- die blaue LED leuchtet dauerhaft- beim Drücken der SET oder MODE Taste leuchtet zwar die grüne LED aber die Sender-Kalibrierung oder die Mode-Programmierung lässt sich nicht starten- Motor dreht nicht Der Hall Sensor Level Converter senkt die Hall-Sensorsignale dieser Motoren auf den Pegel, für den der Flow X optimiert wurde und behebt damit das Problem. Die Pegelwandlung ist die einzige Funktion des Hall Sensor Level Converters, d.h. bei dessen Verwendung entsteht kein Vor- oder Nachteil und auch keine Leistungssteigerung. Empfohlene Vorgehensweise:1. Zuerst sollte der ausgewählte Motor mit einem Standard-Hall-Sensorkabel am Flow X angeschlossen werden. Wenn es in dieser Kombination keine Probleme gibt, kann das Standard-Hall-Sensorkabel weiterhin verwendet werden.2. Nur wenn es in dieser Kombination Probleme gibt, sollte der Hall Sensor Converter verwendet werden.

Für die Hall-Sensorsignale gibt es keinen einheitlichen Standard. Da der Flow X für die Hall-Sensorsignale von LRP-Motoren optimiert wurde, kann es vorkommen, dass Motoren anderer Hersteller nicht problemlos mit dem Flow X funktionieren. Das liegt daran, dass diese Motoren die Hall-Sensorsignale auf einen Pegel anheben, für den der Flow X nicht optimiert wurde. Wird ein solcher Motor an den Flow X angeschlossen, kann es vorkommen, dass die Startsequenz unterbrochen und deswegen nicht vollständig abgeschlossen wird. Dabei können folgende Probleme auftreten:- Flow X reagiert nicht auf den Sender- die blaue LED leuchtet dauerhaft- beim Drücken der SET oder MODE Taste leuchtet zwar die grüne LED aber die Sender-Kalibrierung oder die Mode-Programmierung lässt sich nicht starten- Motor dreht nicht Der Hall Sensor Level Converter senkt die Hall-Sensorsignale dieser Motoren auf den Pegel, für den der Flow X optimiert wurde und behebt damit das Problem. Die Pegelwandlung ist die einzige Funktion des Hall Sensor Level Converters, d.h. bei dessen Verwendung entsteht kein Vor- oder Nachteil und auch keine Leistungssteigerung. Empfohlene Vorgehensweise:1. Zuerst sollte der ausgewählte Motor mit einem Standard-Hall-Sensorkabel am Flow X angeschlossen werden. Wenn es in dieser Kombination keine Probleme gibt, kann das Standard-Hall-Sensorkabel weiterhin verwendet werden.2. Nur wenn es in dieser Kombination Probleme gibt, sollte der Hall Sensor Converter verwendet werden.

Die neueste Power Kondensator Generation basiert der aktuellsten Polymertechnologie mit geringstem Innenwiderstand. Das PCB wurde vollständig überarbeitet um den effektivsten Schutz und eine optimierte Leistungsabgabe zu erzielen. Die geringe Größe lässt ihn perfekt in jedes Chassis passen. Der Kondensator ist bereits standardmäßig bei der Flow X Serie enthalten und kann an jeden anderen Regler als Tuningteil sowohl für 1S als auch 2S Anwendungen angeschlossen werden. Kapazität: 2x 470µf Spannung: 16V Interner Widerstand: 0.004 ? Dynamische Strombelastbarkeit: 12.2A Abmessungen: 31x13,6x15,2mm (LxBxH, mit Schutzhülle, ohne Kabel) Gewicht: 5g Einsatzbereich: 1:10 Stock & Modified / 1:12 Stock & Modified

Der Flow X ist mit einem komplett neu entwickelten Powerboard und Logikboard ausgestattet, um das volle Potential der neuen Software ausschöpfen zu können und höchste Zuverlässigkeit unter den heutigen extremen Anforderungen im Renneinsatz zu gewährleisten. Durch die 8 Kupferschichten und eine erhöhte Gesamtdicke von 2,8 mm erreicht das Heavy-Duty-Powerboard einen sehr geringen elektrischen Widerstand und reduziert dadurch die Kerntemperatur erheblich. Zum ersten Mal kommen die LRP-exklusiven Leistungstransistoren „Customized Super FETs CSF-01“ zum Einsatz. Zur weiteren Verbesserung der Wärmeableitung sind auf der Ober- sowie Unterseite des Powerboards neue Kühlplatten aus Kupfer montiert. Zusätzlich stellen das hochbelastbare 6V/6A BEC und neu ausgewählte High-End-Komponenten einen konstanten Einsatz unter extremen Bedingungen sicher. Abgerundet mit schwarzen 12AWG Powerkabeln, einem 175mm Empfängerkabel sowie einem beeindruckenden neuen Gehäuse und Tastern komplett aus dunkelblauem Aluminium sticht der Flow X aus der Masse heraus und passt in jedes Tourenwagen-Chassis. Der Flow X Stock Spec wird mit der brandneuen v5.1 Software ausgeliefert. Diese Software ist an die neue Hardware speziell angepasst. Entscheidende Features wurde hinzugefügt, damit das beste Stock-Racing heute und morgen möglich ist. Der Flow X mit der neuen Stock Spec Software ist DER Regler für alle Stock Klassen, egal ob On- oder Offroad. Die neue IDFC (Initial Drive Feel Compensation) Funktion wurde speziell für Stock Racing entwickelt um ein gleichmäßiges Initial Drive Gefühl über die komplette Laufdauer zu erreichen. Somit kompensiert die Funktion den Verlust eines heißer werdenden Motors während eines Laufes und passt die Gaskennlinie entsprechend an um eine konstante Leistungsentfaltung zu gewährleisten. Neu entwickelt wurden spezielle Stock-Parameter für das Timing um das Maximum an Leistung in den Boost-Klassen erreichen zu können. Die neue BDX-S Bremse rundet das Paket für Stock Fahrer ab. Es sind nun 4 verschiedene Bremstypen inklusive BDX-S enthalten, die speziell für den FLOW X StockSpec entwickelt wurden um auch engste Kurven perfekt anbremsen zu können. Zur Markteinführung setzt LRP weiterhin auf sein bekanntes und effektives System der Mode-Programmierung, das schnelle Software-Anpassungen per Taster an der Rennstrecke ermöglicht, ohne dass ein separates Programmiergerät benötigt wird. Trotzdem wurde die Flow X Fahrtenregler-Serie mit dem Hintergrund entwickelt ein externes Programmiergerät anschließen zu können, das bereits in Planung ist. In Verbindung mit einem komplett neuen Bedienungsanleitungskonzept bleibt der Flow X effektiv und für jeden einfach zu bedienen. LRP-exklusive Leistungstransistoren: „Customized Super FETs CSF-01“ für höchste Leistung und Effizienz Heavy-Duty-Powerboard mit 8 Lagen und 2,8 mm Dicke für minimalsten Widerstand und geringste Kerntemperaturen V5.1 dedizierte Stock Spec Software für Sto Abmessungen: 33.7x32.6x19.8mm Eingangsspannung: 7.4V (2S) B.E.C.: 6V/6A linear Vorwärts/Bremse: Ja Multi-Mode Profileinstellung: Ja Multi-Protection-System: MPS4 Sensored Brushless System: Ja Powerkabel: WorksTeam 12 AWG schwarz Empfohlenes Motorlimit: über 2.5T Strombelastbarkeit: 220A Gewicht (ohne Kabel): 44g USB Software Updatebarkeit: Ja

Hobbywing EzRun SL 5687 1100kv, 1/6, Black V1 30402550

Hobbywing EzRun SL 56113 800kv, 1/6, Black V1 30402900

Die Ro-Control NAVY Serie von Robbe ist für den RC-Schiffsmodellbau gedacht. Ob im Einsteiger oder Fortgeschrittenensektor - mit den Ro-Control NAVY Reglern treffen Sie die richtige Wahl wenn es um professionelle Regler für Ihr RC-Boot geht. Features: Regler ist wasserdicht hochwertige Komponenten wurden verbaut sehr gute Kühlung über einen externen Programmieranschluss kann die optionale Programmierbox verwendet werden und die Einstellung des Reglers verändert werden Überhitzungsschutz Unterspannungsabschaltung Signalverlustschutz eingebautes Hochstrom BEC Innovative Turbo Funktion wasserdicht hier zählt Zuverlässigkeit und Leistung KühlsystemTechnische Daten:Zellen: 2-3 LipoDauer A: 60Max A: 360BEC: 6V/3AGröße: 61/39/26 mmGewicht: 93 g