Art.Nr.: 300054632Artikelbezeichnung: TT-02S Dämpferbrücke Vorn CarbonThis is a front carbon damper stay designed to be used on the TT-02 Type S chassis platform. It replaces the kit standard fiberglass part for increased rigidity and damper movement effectiveness.- The TT-02 Type-S damper stay is reproduced in durable and rigid carbon fiber.- Small parts (ball connector nuts, etc.) for attachment included.- Compatible with TT-02 Type-S chassis.- Use with standard TT-02 chassis requires separately-sold reversible suspension arms, Item 54634 TT-02 Type-S Aluminum Suspension Mount Set and oil dampers (Item 42102)  

Art.Nr.: 300054633Artikelbezeichnung: TT-02S Dämpferbrücke Hinten CarbonThis is a rear carbon damper stay designed to be used on the TT-02 Type S chassis platform. It replaces the kit standard fiberglass part for increased rigidity and damper movement effectiveness.- The TT-02 Type-S damper stay is reproduced in durable and rigid carbon fiber.- Small parts (ball connector nuts, etc.) for attachment included.- Compatible with TT-02 Type-S chassis.- Use with standard TT-02 chassis requires separately-sold reversible suspension arms, Item 54634 TT-02 Type-S Aluminum Suspension Mount Set and oil dampers (Item 42102)  

Art.Nr.: 300054634Artikelbezeichnung: TT-02S Aufhängungsset vo./hi. StahlThis handy set provides TT-02 Type-S chassis kit suspension mount parts to fit to the front and rear of the chassis. The racing-focused set gives new set-up options, and the suspension mounts now feature a new design compatible with rebound stoppers.Contains Front & Rear Suspension Plates x1 each, Gearbox Joints x4, Front & Rear Suspension Shaft Adapters x1 each, plus spacers and flanged pipes.- New front and rear plates are compatible with rebound stoppers (sold separately).- Rear plate gives a setup with 3 degrees of toe-in for excellent stability.- Suspension arms, uprights not included.- Compatible with TT-02 Type-S chassis.- Use with standard TT-02 chassis requires separately sold damper stays Item 54632 (Front) and Item 54633 (Rear), plus oil dampers (Item 42102, etc.).  

Art.Nr.: 300054638Artikelbezeichnung: TT-02 Type-S Ausfederwegsbegrenzer (2)These are steel rebound stoppers available for use with the TT-02 Type-S suspension mounts. Fit them to help prevent your car from bottoming out as it runs.Contains Steel Rebound Stopper x2- For use with TT-02 Type-S Suspension Mounts in Item 54634, or available separately as Item 54636 (Front) and Item 54637 (Rear).- Compatible with TT-02 Type-S chassis.- Use with standard TT-02 chassis requires separately sold TT-02 Type-S Suspension Mounts Item 54636 (Front) and Item 54637 (Rear), damper stay, plus oil dampers (Item 42102, etc.)  

Art.Nr.: 300054642Artikelbezeichnung: M4/4mm Stoppmutter (8) Schwarz elox.This set is a color variation of the flange lock nuts found in Tamiya RC kits. They provide a durable and stylish wheel attachment option.Nylon 4mm Flange Lock Nut x8Compatible with a range of touring car and off-road cars.  

Art.Nr.: 300054643Artikelbezeichnung: MF-01X Kugellagersatz (24)Tune the MF-01X chassis with these ball bearings, for smooth running and minimal power loss in the drivetrain. The set contains enough bearings to complete the kit.- 1150 Ball Bearing x20- 850 Ball Bearing x2- 850 Flanged Bearing x2- For use with MF-01X chassis cars.  

Art.Nr.: 300054649Artikelbezeichnung: TT-02/B/T/D Alu Differenzial-Sperre (1)Have you ever wanted to lock the differential on your TT-02 car? Then this block is perfect. Simply insert into the differential gear case in place of the kit-standard gears, and the diff is locked! This can be useful on extreme high-grip surfaces, or when drifting.Differential Locking Block x1Compatible with TT-02 chassis variant cars.  

Art.Nr.: 300054651Artikelbezeichnung: TT-02S Alu Querlenkerh. (2) ob./vo/hi.These mounts change the height of the turnbuckle upper suspension arms on the TT-02 Type-S chassis, altering the suspension stroke and therefore the chassis handling. They also add toughness to the suspension.•Blue anodized aluminum is lightweight and durable.•Can be used on the front or the rear of the TT-02 Type S chassis.•Includes small parts for attachment.•Compatible with TT-02 Type-S specification cars ONLY.  

Art.Nr.: 300054666Artikelbezeichnung: CC-01 Tonnenfedern-Set (3x2) soft/med/haThis set includes 3 stiffness’s of barrel spring which give your chassis progressive damping, i.e. more resistance the further they are compressed. This gives a smoother off-road ride and better handling of roll. Colored bands show spring hardness.•Soft Barrel Spring x2•Medium Barrel Spring x2•Hard Barrel Spring x2•Compatible with CC-01 chassis cars.  

Art.Nr.: 300054670Artikelbezeichnung: GF-01 Alu Öldruckstoßdämpfer Set (4)Diese Aluminium-Öldämpfer sind für das zahnradgetriebene 4WD GF-01- und 2WD WR-02-Chassis ausgelegt. Passen Sie sie an, um auf schwierigen Oberflächen eine hervorragende Dämpfung zu bieten, und lassen Sie Ihr Modell auch großartig aussehen!Neu gestaltete Zylinder haben eine silberfarbene Oberfläche, die einen schönen Kontrast zu den blau eloxierten Kappen und Enden bildet.Kleinteile zur Befestigung liegen bei.Kompatibel mit Fahrgestellwagen GF-01 und WR-02.  

Art.Nr.: 300054688Artikelbezeichnung: TC Racing Heckspoiler Set (2)Carbon LookThis wing set is made of 0.7mm-thick polycarbonate with a carbon pattern. The wings are compatible with any Tamiya touring or sports car body that has space available to make wing attachment holes. Whether it's to add a stylish look to your vehicle or to raise your downforce on a tough track, this item is for you! It includes 2 newly-designed wings.•Curved wing x1•Straight wing x1•J Parts (wing stay) x1•Note: Snap pins and O-rings necessary for attachment.  

Art.Nr.: 300054693Artikelbezeichnung: Doppelseitiges Tape 20mm (2m) schwarzThis high quality heat-resistant double-sided tape is often used on R/C models to secure and protect equipment. This version comes in roll form compared to Item 50171, which came in individual strips. It's perfect for frequent users.Double-Sided Tape (20mm x 2m roll) x1  

Art.Nr.: 300054704Artikelbezeichnung: TRF420/419/TA-07 Alu Lenkhebel-SetThis lightweight, rigid aluminum parts share the proven TRF419 race machine design. Fit them in place of the kit-standard plastic TA07 PRO parts to add bite to your handling at high speed.• Aluminum Steering Arm x2• Parts have a blue anodized finish.• 850 ball bearings are pre-inserted into the arms.• Recommended for use with Item 54705 TA07 Aluminum Steering Bridge.• Compatible with the TA07 PRO chassis, TRF419 and TRF419X chassis.  

Art.Nr.: 300054705Artikelbezeichnung: TA-07 Alu Lenkhebelverbinder/BrückeLike Item 54704 (TA07 Aluminum Steering Arm Set), this lightweight, rigid aluminum part shares the proven TRF419 race machine design. Fit instead of the TA07 PRO kit-standard plastic part to add bite to your handling at high speed.•Aluminum Steering Bridge x1•Part has a blue anodized finish.•630 ball bearings are pre-inserted.•Recommended for use with Item 54704 TA07 Aluminum Steering Arm Set.•Compatible with TA07 PRO chassis, TRF419 and TRF419X chassis.  

Art.Nr.: 300054725Artikelbezeichnung: TA-07 Alu Halterung Motorträger (2) BlauThese motor mounts are made of aluminum. They replace the kit standard plastic parts that attach to the main motor plate for increased rigidity and support when using high powered motors.Aluminum Motor Mount Post x2Blue anodized finish.Aluminum parts give rigid attachment and minimal power loss, even when using more powerful motors.Compatible with TA07 PRO chassis cars.  

Art.Nr.: 300054729Artikelbezeichnung: 1:10 Racing Heckspoiler Alpha Carb.DekorFor touring car races, it is essential to equip a rear wing that matches the body in terms of styling and down force effect. The racing wing version type "A" offers a stepped wing element design and is made of polycarbonate material. This version of the wing incorporates a carbon fiber pattern for stylistic appearance.Set Contents:•Racing Wing A x1•J Parts (wing stays) x1•Snap pins and O-rings necessary for attachment are included.•Wing part has carbon pattern pre-printed.•Compatible with 1/10 scale car bodies that have space to make attachment holes.  

Art.Nr.: 300054747Artikelbezeichnung: TRF Low-Fric. Kugeln 5mm (8) AufhängungThese low-friction POM resin suspension balls were originally used on the TRF419X chassis. They are available separately for use on any of Tamiya's vehicles that utilize 5mm suspension balls.•Low Friction 5mm Suspension Ball x8•Low friction parts give improved smooth motion of the suspension system.  

Art.Nr.: 300054752Artikelbezeichnung: TT-02 Alu Lenkungsset m. HT Servo SaverThis handy kit includes a full set of option parts to replace the kit-standard plastic steering parts found on a stock TT-02 chassis machine. This set is ideal for beginners or first-time upgraders to option out their TT-02!•Aluminum Steering Arms x2 (Item 54574)•Aluminum Steering Posts x2•Steering Bridge x1 (Item 54575)•Hi-Torque Servo Saver (Black) x1 (Item 51000)•TT-02 Hi-Torque Servo Saver Horn x1 (New Part)•A host of other metal parts for attachment and setup adjustment are included.  

Art.Nr.: 300054753Artikelbezeichnung: TT-02 CVA Super Mini Dämpfer-Set (4) m.FThis plastic shock set includes 4 CVA oil-filled dampers and medium black springs. The short black springs are denoted with a yellow paint mark to denote its medium spring rate for easy identification. When fitted onto any of Tamiya’s TT-01 or TT-02 chassis machines, they will improve stability and help the car hold uneven surfaces.This set is ideal for beginners or first-time upgraders!•Contains parts to make 4 CVA Super Mini oil shock dampers.•Includes 4 black (medium) springs denoted with a yellow paint mark.  

Art.Nr.: 300054754Artikelbezeichnung: TT-02B Carbon Dämpferbrücken-Set V/HThis option part set includes 3mm thick carbon fiber versions of the FRP TT-02B damper stays (Items 54556-7). Rigid carbon fiber will give improved rigidity over kit standard plastic parts.•3mm thick Carbon Front Damper Stay x1•3mm thick Carbon Rear Damper Stay x1•Compatible with TT-02B chassis cars.  

Art.Nr.: 300054757Artikelbezeichnung: M-07C Stabi-Set (2+2) Soft/Hart Vo./Hi.These stabilizers are designed to be used with the M-07 Concept machine. They are a valuable tool in adjusting the M-07 Concept setup by quickly and easily altering the suspension rigidity and handling characteristics. The set includes 2 stiffness’s for the front and rear of the car, plus adjusters to easily alter the Left and right balance.•Front Stabilizers (Soft: red, Hard: blue) x2•Rear Stabilizers (Soft: red, Hard: blue) x2•Adjuster rods, stabilizer stoppers and small parts for attachment included.•Compatible with M-07 Concept chassis.  

Art.Nr.: 300054759Artikelbezeichnung: M-07C Alu Motor-Kühlkörper Blau elox.This aluminum heat sink uses fins to help heat dissipate from the motor mounted on the M-07 Concept chassis. The use of a heat sink helps to prevent loss of performance from overheating in a long race.•Aluminum Motor Heat Sink x1•Anodized in blue.•3x8mm screw for attachment included.•Compatible with M-07 Concept chassis.  

Art.Nr.: 300054760Artikelbezeichnung: M-07C Alu Querlenkerhalter hinten (4)These durable, precision aluminum mounts make for secure suspension arm attachment on the M-07 Concept chassis. Suspension balls are included to keep motion smooth, even with toe applied to the wheels.•Aluminum Rear Suspension Mounts x4•Anodized in blue.•Small parts for attachment included.•Compatible with M-07 Concept chassis.  

Art.Nr.: 300054761Artikelbezeichnung: M-07C Carbon Dämpferbrücke VorneTune your M-07 Concept chassis with this 3mm thick carbon fiber front damper stay! Lighter weight and with greater rigidity than kit standard plastic parts, it boosts handling and offers more tuning options. The damper stay also features 4 attachment holes compared to the 2 attachment holes from the kit standard shock tower.•3mm-thick Carbon Fiber Damper Stay (Front) x1•Screws for attachment included.•Compatible with M-07 Concept chassis.